Bitcoind – Commands, RPC Protocol, Install Server ...

bumbacoin news

bumbacoin is a new exciting crypto currency. the natural successor to bitcoin. bumbacoin is sexy and full of de magic de bumba.

Bitcoin W Spectrum (BWS)


Fastcoin - The fastest software-based online payment system

Nobody wants to wait longer then they have to when performing a currency transaction. That's why we believe FastCoin is positioned to do well in the Crypto currency marketplace.

what is the significance of the rpc port and it's relation to the functionality of bitcoin

what is the significance of the rpc port and it's relation to the functionality of bitcoin submitted by s-matthew-english to Bitcoin [link] [comments]

Samourai Wallet needs access to your node's JSON-RPC port if you're using a Trusted Node... why? /r/Bitcoin

Samourai Wallet needs access to your node's JSON-RPC port if you're using a Trusted Node... why? /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

what is the significance of the rpc port and it's relation to the functionality of bitcoin

what is the significance of the rpc port and it's relation to the functionality of bitcoin submitted by coincrazyy to BitcoinAll [link] [comments]

what is the significance of the rpc port and it's relation to the functionality of bitcoin

what is the significance of the rpc port and it's relation to the functionality of bitcoin submitted by s-matthew-english to btc [link] [comments]

Beirut Explosion Megathread - Please post your support here.

Live thread:

Consider donating to NGOs in Lebanon:

Blood Donations:

For Lebanese, please consider donating blood:
  1. Contact
  2. Contact
  3. Contact AUBMC blood bank:
  4. Go to any hospital.
  5. NOTE: Careem is offering a free ride for anyone who wants to donate: LINK

Physical stuff donations (food, clothes, covers, medicine): LINK

Urgent Needs

If you need a place to stay check

Doctors For Lebanon

Missing People:

Links for videos and updates:

Youtube videos:

Reddit Links:

Map of places to get help LINK
This is a google earth map that shows the locations some of the videos were taken from LINK
submitted by ThePerito to lebanon [link] [comments]

Gridcoin "Fern" Release
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.



Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.


Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.


The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog



Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.







As a reminder:









Detailed Changelog

[] 2020-09-03, mandatory, "Fern"





submitted by jamescowens to gridcoin [link] [comments]

How to run two bitcoind processes in isolation (Windows)

I have a synced node, and I would like to create a pruned copy of that node without destroying all blocks and chainstate I already have. My thought would be to run two copies of bitcoin {BitcoinA.exe, BitcoinB.exe}, while offline and bound to Both A and B point to each other through a connect or addnode config setting. My thought would be that now the "blank" bitcoin node (BitcoinB) would download and prune all the block data from BitcoinA via localhost.
I can imagine that I'd need separate data, block and chainstate dirs. I'll need separate rpc-cookies and separate ports.
Obviously I could just do the 300 GB file copy then do a rescan, but I figured I'd get faster IO on localhost<->localhost than disk<->disk.
Surely this is a fairly common way to clone block data. Has anyone done this before? Thoughts or advice?
submitted by brianddk to Bitcoin [link] [comments] a UTXO monitoring methodology and script for true connoisseurs of security, paranoia and BTC maximalism

Disclaimer: the below script is provided for example purposes only. You're responsible for your own security. Don't trust, verify.
tldr: the script is literally just an example wrapper to call "gettxout" on your own node via cron to check if your own utxo has been spent yet
OK, since there are a few questions on security below, let me clarify: this script is only for people who are 1) already running their own nodes and 2) can understand the bash script below. And obviously, don't trust some random person on the internet, always verify. I provided this as an example for a way to monitor your own UTXOs with your existing node. Those of you who understand what the below script does will see it's painfully simple and obviously harmless. Those of you who don't understand it, just ignore this post, or better yet, research what the below means until you do understand it. What's important is the idea of monitoring your own UTXO, and this script is an example of how to do that with gettxout.
Submitting this to help strengthen the community, and for review: a UTXO monitoring methodology and script for true connoisseurs of security, paranoia and BTC maximalism
Monitor canary UTXOs for early detection of compromised private keys BEFORE funds are lost, using your own full node for maximum privacy and trustlessness. Note that you will need to implement your own notification strategy (email, push, sms, etc). This script is intended to run on your full node, but can be run from any machine with RPC access to your full node. is designed to check if a given UTXO (i.e. a specific output of a specific btc transaction) has been spent or not. This can be used for early and proactive detection if a seed phrase or private key has been compromised, so you have time to move your btc before full compromise happens. In order for this to work, a small amount of btc should be sent to an address controlled only by a given seedphrase, with that seedphrase being part of a multisig wallet or a seedphrase+passphrase wallet, and the majority of your funds controlled in the seedphrase+passphrase or multisig wallet. The idea is to leave the small amount of btc (the canary utxo) in the address, so that it never moves unless the seedphrase that controls it has been compromised and all funds in the wallet swept. In this way, you use those compromised sats to buy information about the current security status of your wallet(s).
Example usage:Set up a cron job to run every 30 min to check if transaction output at index "0" for transaction with id "123" has been spent already. Use "my_utxo_nickname" as a friendly name for the UTXO (to differentiate between multiple wallets)
*/30 * * * * /path/to/ 123 0 my_utxo_nickname > /tmp/hodlmon_log 2> /tmp/hodlmon_err_log
Usage scenario #1: Seedphrase (A) + passphrase (A')Majority of funds are held in a wallet controlled by both the seedphrase and passphrase, A and A'. A token amount of btc is controlled only by seedphrase A.
A + A': majority of funds
A: canary UTXO is used to monitor the canary funds locked by A, so that if it is discovered that A has been compromised, the funds locked by A and A' can be moved to a new wallet before the passphrase A' can be cracked and all your funds exfiltrated.
Usage scenario #2: multisig e.g. 2 of 3, with seed phrases A, B and CMajority of funds held in a multisig wallet controlled by 3 seedphrases A, B, and C. 3 small canary UTXOs are held in wallets each controlled by A, B or C, respectively.
A + B + C: majority of funds
A: canary UTXO 1
B: canary UTXO 2
C: canary UTXO 3
One benefit of multisig (e.g. 2 of 3) is that even if 1 key is compromised, your funds are safe, since at least 2 keys are needed to release funds. But how do you that none of the keys has yet been compromised? If you create separate wallets controlled each by only 1 of the individual keys, and use to monitor whether those UTXOs have been exfiltrated, then you can detect partial compromise of your setup before a full exfiltration event takes place, so you can move your funds to a new multisig wallet with freshly generated and uncompromised keys.
Example of 3 cronjobs to monitor all 3 canary UTXOs:
*/30 * * * * /path/to/ 123 0 key1 > /tmp/hodlmon_log_1 2> /tmp/hodlmon_err_log_1
*/30 * * * * /path/to/ 456 0 key2 > /tmp/hodlmon_log_2 2> /tmp/hodlmon_err_log_2
*/30 * * * * /path/to/ 789 0 key3 > /tmp/hodlmon_log_3 2> /tmp/hodlmon_err_log_3

Example hodlmon script:
touch /tmp/hodlmon_last_run
echo "Transaction ID: $1"
echo "Output #: $2"
echo "Nickname: $3"
NODE_IP= #TODO: use actual value
USER=user#TODO: use actual value
PASS=pass #TODO: use actual value
PORT=8332 #TODO: use actual value
CHECK_CMD="/uslocal/bin/bitcoin-cli -rpcconnect=$NODE_IP -rpcuser=$USER -rpcpassword=$PASS -rpcport=$PORT gettxout $1 $2"
echo "${RESULT}"
if [ "$RESULT" == "" ]
MSG="The UTXO for $3 from tx $1 output $2 has moved!"
echo "UTXO is still on ice"

submitted by facepalm5000 to Bitcoin [link] [comments]

WaykiChain (WICC) Monthly Report (September 2020)

WaykiChain (WICC) Monthly Report (September 2020)
Technology & Products
Public Chain Development
· WASM AMPL contract debugging (100%)
· Research on WASM zero-knowledge proof anonymous transfer (50%)
· WASM Sushi contract coding (100%)
· WASM RPC iOS asynchronous library commissioning (100%)
· Verification of the signature push public key algorithm and testing its codability (C++, go) through RPC (100%)
· The new lock-up airdrop contract function: lock-up users can claim the unlocked assets by entering RegID (100%)
· Porting ASWAP contract to public chain 3.0, adding platform fee processing (100%)
· Optimization of Yield Farming contract reward distribution (100%)
· Optimization of Yield Farming contract penalty distribution mechanism (100%)
· Yield Farming contract testing (100%)
· Deployment and initial configuration of WICC and WGRT yield farming contracts and Wayki-X contract completed (100%)
· Ownership of issuance and transfer rights of the bottom-level token ROG transferred to Wayki-X contract (100%)
· The initial generation of ROG completed. 10.08M ROG entered the WICC pool, 2.52M ROG entered the WGRT pool (100%)
· The first 189,000 ROG was minted in Wayki-X contract for rewards by inflation (12.6M × 1.5%) (100%)
· Transfer of 70,000 ROG to AEX for Ecosystem Yield Farming completed (100%)
· WASM developer documentation: added detailed WASM table (Simplified Chinese) (100%)
· WASM developer documentation: added call of multiple contracts and multisignature transactions in WASM contract (Simplified Chinese) (100%)
Application Development
· Yield Farming back end API (100%)
· Yield Farming front end page optimization (100%)
· Yield Farming front end localization (100%)
· Yield Farming pre-release initial API docking (100%)
· Yield Farming application testing (100%)
· Yield Farming application release (100%)
· xUSD & ROG added to Instant in WaykiTimes Android (100%)
· Memory leak issue fixed in Instant in WaykiTimes (100%)
· Data loading error when swiping in Discover fixed in WaykiTimes (100%)
· Data display optimized in Getting Started in WaykiTimes
· UI debugging of several pages in WaykiTimes (100%)
· WaykiTimes 3.0.4 released (100%)
· WaykiTimes Help Center released (100%)
· WaykiTimes Getting Started released (100%)
· WaykiTimes remember password function released (100%)
· WaykiTimes iOS App Store version tested (100%)
· Google crash analysis and testing added to WaykiTimes Android (100%)
· Solved the data loading issue when swiping in Wayki-X Synths (100%)
· Wayki-X price feed delay fixed (100%)
· Amount issue in the plug-in wallet fixed (100%)
· Display error of release contract type of universal transactions fixed on the blockchain explorer (100%)
· WASM contract display specifications for the blockchain explorer completed (100%)
· Development of the Coinbase integration project (wicc-rosetta-api) (85%)
Plan for October
Public Chain Development
· Research on WASM zero-knowledge proof anonymous transfer
· Correction of ASWAP contract proof of liquidity token generation rules
· ASWAP contract testing
· Docking of ASWAP contract with third parties
· Continuous updating of coind RPC interface documentation
Application Development
· Trade — transaction details HTML5 page to native page transfer in WaykiTimes
· Development of the Coinbase integration project (wicc-rosetta-api)
International Market
· On September 4, Russian volunteers opened the second WaykiChain Russian group in Telegram:
· On September 6, WaykiChain opened the official community in Discord:
· On September 6, WaykiChain CTO Richard Chen was invited to the Blockchain + Innovative Service and Industrial Application Conference and the China Chamber of International Commerce Blockchain Innovation Service Industry Committee Establishment Conference as a member of the expert group.
· On September 11, the famous US blockchain TV program Exploring the Block tweeted about WaykiChain, showing it is optimistic about the future development of the integrated DeFi ecology of WaykiChain.
· On September 11, the famous business platform Yahoo Finance released WaykiChain project information and announced that WaykiChain CEO Gordon Gao gives an interview to NASDAQ MarketSite’s Jane King on September 12.
· At 7:00 PM EDT on September 12, world’s largest financial channel Bloomberg TV reported that WaykiChain CEO Gordon Gao was interviewed by Jane King of NASDAQ MarketSite. The interview aired on Fox Business Network at 10:30 PM EDT on September 14.
· On September 12, cryptocurrency Twitter account Crypto Catalog tweeted about WaykiChain, showing it is optimistic about the future development of the integrated DeFi ecology of WaykiChain.
· On September 13, DeFi List added WaykiChain governance token WGRT.
· On September 13, WaykiChain reached market cooperation with the Indian blockchain influencer Gmadvice who started to serve as WaykiChain community manager in India.
· On September 16, WaykiChain released “WaykiChain Launches Phoenix Yield Farming with WICC/WGRT Dual-pool for ROG Genesis Issuance” on Twitter. Up to September 21, the news hit 2,400+ retweets.
· On September 17, the cryptocurrency influencer DeFi List retweeted “WaykiChain Launches Phoenix Yield Farming with WICC/WGRT Dual-pool for ROG Genesis Issuance”.
· On September 18, WaykiChain reached strategic market cooperation with the Korean crypto influencer Pantera who will help WaykiChain establish a broad and strong consensus in Korea.
· On September 19, “WaykiChain Dual-pool ROG Yield Farming Korean Group” community established.
· On September 20, the influencer Crypto Wendy retweeted “WaykiChain Launches Phoenix Yield Farming with WICC/WGRT Dual-pool for ROG Genesis Issuance”.
· On September 21, 130+ Korean media outlets published “WaykiChain Launches Phoenix Yield Farming with WICC & WGRT Dual-pool for ROG Genesis Issuance”.
· On September 23, WaykiChain co-founder and CEO Gordon Gao was invited to an AMA session with ICO Pantera Group, Korea’s top Telegram group (stats by u/combot), where he shared his insights into DeFi with 4,000+ Korean users and introduced WaykiChain’s ROG Genesis Yield Farming.
· On September 24, WaykiChain tweeted “ROG Genesis Yield Farming FAQ” and “Leave your question/problem toward WaykiTimes/Wayki-X/ROG Genesis Yield Farming in the Google forms below to share 800 WICC Giveaway!”, the number of engagements is 1,500+.
· On September 24, WaykiChain global partner Vincent Lionheart was invited to an AMA session to D’va Community.
· On September 24, The Business Telegraph, Bitcoin Garden, and other media published “WaykiChain Launches Phoenix Yield Farming with WICC & WGRT Dual-pool”.
· On September 24, WaykiChain tweeted the ROG Genesis Yield Farming Countdown. The news hit 1,000+ retweets.
· On September 25, ROG Genesis Yield Farming news was the day’s hit in Korea with 5,000+ views on Korean cryptocurrency forums.
National Market
· On September 1, CoinTiger listed WaykiChain governance token WGRT and opened the WGRT/USDT pair. WGRT net buy & hold competition started and the CoinTiger community joined a series of WGRT-themed challenges.
· On September 1, WaykiChain governance token WGRT successfully mapped to Ethereum and ERC-20 WGRT was created. The world’s largest DEX Uniswap officially supported it and listed the WGRT/USDT pair.
· On September 2, WaykiChain Strategic Analyst Jing Tao gave the speech “WGRT Dragon, Fly, Tiger, and Leap: Community Governance Upstart” to the MXC community and distributed 3 gold bars to the event participants.
· On September 7, WaykiChain Strategy Analyst Jing Tao attended [This Is Coin Coffee] live DeFi contest co-sponsored by Coinka,, and WEDEX founder & CEO, Loopring co-founder Chen Xiaoliang and ChainNews Research Director Pan Zhixiong joined the event.
· On September 9, selected WaykiChain governance token WGRT for the Listing Vote. Each voter had a chance to share an airdrop of 420,875.43 WGRT. WGRT passed the voting with 53,293,775 votes and was successfully listed on
· On September 10, WGRT/USDT trading pair and WGRT withdrawals opened on
· On September 10, WaykiChain released WaykiChain Governance Token WGRT Information and Addresses. The team announced that before July 1, 2021, WGRT circulating supply will be strictly controlled at 10% of the total supply, or 2.1 billion.
· On September 9 to 11, WaykiChain was invited to IoT World China & 5G China along with 400+ exhibitors including Huawei, Baidu, and Tencent. WaykiChain demonstrated the integrated public chain DeFi ecosystem that will help China’s digital construction.
· On September 11, WaykiChain Strategy Analyst Jing Tao was invited to the Bepal community and shared the speech “WaykiChain Governance Token WGRT: Accumulation and Breakout”. WaykiChain airdropped 3,000 WGRT and cash red envelopes to the Bepal community members.
· On September 12, WaykiChain Technology & Development Manager Yuanhang Xiao and Strategy Analyst Jing Tao introduced [New WaykiChain DeFi Product: Decentralized Synthetic Asset Issuance Protocol Wayki-X] in the official WaykiChain yizhibo account. During the live broadcast, WaykiChain distributed pure gold bars and branded gifts to lucky users.
· On September 13, WaykiChain co-founder & CEO Gordon Gao and Overseas Director Qiyuan Mei shared the speech “WaykiChain Opens the Era of Integrated DeFi Public Chains” in the live broadcast room. CPO Jiuer was the broadcast host. The guests explained WaykiChain’s DeFi strategy and revealed the launch of Yield Farming.
· On September 15, WaykiChain CEO Gordon Gao and BTC38 co-founder Tianwei Huang held the live stream titled “Eight Questions to Explain DeFi Trends and Opportunities” in yizhibo. The hosts analyzed the status and trends of DeFi, discussed DeFi deployment by public chains and exchanges, and new opportunities in synthetic asset trading. WaykiChain distributed pure gold bars and branded gifts to lucky viewers of the stream.
· On September 16, WaykiChain Strategy Analyst Jing Tao shared the speech titled “WaykiChain’s Integrated DeFi Ecosystem Layout” as the guest of
· On September 18, Bying community invited WaykiChain Strategy Analyst Jing Tao to share the speech “New DeFi Opportunity: Phoenix Yield Farming”. WaykiChain held a WICC airdrop for Bying community members.
· On September 18, WaykiChain published the article “No Pre-mining, ICO, or Reserve! WaykiChain Launches Dual-pool Phoenix Yield Farming”.
· On September 19, WaykiChain published the article “Chapter 1. The Financial Innovation of Blockchain Reformation. The Origin, Logic, and Value of WaykiChain ROG” introducing the background of ROG, the operation mechanism of the decentralized synthetic asset system Wayki-X, and the value foundation of ROG in detail.
· On September 23, “No Pre-mining, ICO, or Reserve! WaykiChain ROG Genesis Farming and Early Release Guide” was released across Chinese media.
· On September 24, WaykiChain CEO Gordon Gao, CTO Richard Chen, and CPO Xi Zhang held a joint live stream on yizhibo explaining the future planning of WaykiChain decentralized synthetic asset issuance protocol Wayki-X, ROG, and WaykiChain DeFi in terms of business model, technology, and products. WaykiChain distributed 1 pure gold bar and 6 branded gifts to the lucky stream viewers.
· On September 24, and WaykiChain launched the WGRT Investment Competition. The prizes are a BMW G 310 R motorcycle, a 13” MacBook Pro, a 10.2” iPad, 17 pure gold bars and 99,000 WGRT.
· On September 25, various Chinese media released “Wayki-X 101: WaykiChain Decentralized Synthetic Asset Protocol” introducing the functions and mechanism of the decentralized synthetic asset issuance protocol Wayki-X and the value of its token ROG in detail.
· On September 25, WaykiChain launched the “Looking for the Genesis Prophet” community event. The winners received 10 branded gifts.
· On September 25, WaykiChain ROG Genesis Yield Farming launched. WICC and WGRT pool quotas (5 million and 25 million, respectively) were full within just one hour.
· On September 25, WaykiChain reached ecosystem partnership with AEX. AEX became the first platform to join ROG Ecosystem Yield Farming.
· On September 25, WaykiChain partnered with Bying wallet. ROG Genesis Yield Farming is available in Bying wallet.
· On September 26, ROG, the main token of WaykiChain’s decentralized synthetic asset issuance protocol Wayki-X, was listed on AEX. ROG/USDT trading pair is available.
· On September 26, WaykiChain CEO Gordon Gao gave lectures “DeFi Financial Principles and Commercial Applications” and “DeFi Industry Panoramic Scan” at The First Offline Practical Training Camp of Hash Power University, Shanghai Station. Participants included Ontology founder Jun Li, Chainlink Labs — China Head Philip Fei, Digital Renaissance Foundation Managing Director Cao Yin, and Waterdrip Capital founding partner Zheng Yushan.
· On September 28, WaykiChain co-founder and CEO Gordon Gao was a guest at Hash Power Knowledge Base Private Meeting, Shenzhen Station where he shared the speech titled “Feasible Ways of DeFi Application Popularization”. Other guests included Ontology founder Jun Li, DeBank founder and CEO Tang Hongbo, and Huobi Research Chief Technical Researcher Tianyuan Ma.
submitted by Waykichain to WICCProject [link] [comments]

Raspibolt troubles: bitcoind shutting down, out of space?

Hey y'all. Had my node running for some 19-20 months now. Following the Stadicus guide. on a raspberry pi 3. Bitcoin v0.19.0.1
the other day I just checked up on it and noticed it was in a failed state and didn't have the HDD mounted. The log seems to indicate it just stopped, the last entry is
2020-08-21T17:35:41Z socket recv error Connection reset by peer (104) 
I did the troubleshooting guide (no stranger to this) figuring there had been a power outage possibly. I ran fsck and it took a LONG while to find and clean up a lot of errors. The drive works fine, i can connect to it via my pc (using linux file systems paragon) transfer files.. etc. I ran fsck another time or two to be sure and no errors found. It's got 57% free space.
I got the raspberry pi to mount the HDD again, started up bitcoind and it started to sync slowly. I'd check with getblockchain info and figured it would take around 60+ hours to finish and left it overnight.
Today I come back to find it was no longer syncing. Now no matter what I do, starting bitcoind manually, or having it automatically boot getblockchain info gives me an error
error: Could not connect to the server Make sure the bitcoind server is running and that you are connecting to the correct RPC port. 
So bitcoind seems to shutdown instantly after starting it. AND checking the log, the last message from the 21st (above) is all that's there, no new information in the log.
I tried to re-install bitcoin v0.19.0.1 and got a suspect. When extracting the package into the tmp folder, it fails due to out of space errors. So this possibly means something is going on with the SD card? or something filled it up? Not sure what to check, or how really.
curiously the startup script for the raspibolt displays this for the SSD. Not sure how to interpret that. 36M free?
 SSD 36M (240%) 
here i'm stuck, what can I try next? I believe I have backups of the important information. I'd like to avoid a total reformatting if at all possible.
submitted by mabezard to lightningnetwork [link] [comments]

Fun with Dynamic DNS services and bitcoind

I realize that bitcoind has this capability built in, but thought it might be fun to configure it manually. As some background, most people look at their network and they have some address like That is a private network address. Sites like will tell you what your EXTERNAL IP address is. When your running a bitcoin node, people will connect to your external IP.
Problem is... your ISP may cycle that IP address every week or so. bitcoind has a nice feature baked in called discover which will do the work of guessing your external IP as it changes. But if you are doing anything where you need to expose your RPC API externally (*danger*) then it would be nice to have some FQDN to go after to do the IP translation.
Originally, I had always solved this by exposing my node as an onion node. Since onion nodes traverse NATs and firewalls fairly effortlessly this was an easy option. But previously I had played around with Dynamic DNS service. I've used but there are likely dozens of services out there that will get the job done.
Once you have enabled a NoIP hostname, you can name it in your bitcoin.conf using the Then, assuming you setup all the RPC auth and port forwarding, you could access your node via RPC at
As I said... it's a redundancy, since discover=1 does most of this for you, but still thought someone might enjoy the tip.
submitted by brianddk to Bitcoin [link] [comments]

Inject service provider in a custom rule

Hi all,
I've created a Bitcoin wallet validation rule. It needs to use a Provider, a wrapper to Bitcoin RPC functions. How to inject such dependency in the class? The BitcoinRPC service class is registered as a singleton as it needs to be initialised with certain parameters (RPC host and port mainly).
This is the Rule class:
class ValidateBtcWallet implements Rule
....public function passes($attribute, $value, BitcoinRPC $btc_rpc)
........return $btc_rpc->validate($value);
....public function message()
........return 'You may want to double check your BTC wallet address.';
and this is the custom service provider
class BitcoinRPCSeviceProvider extends ServiceProvider
....public function register()
........$config = config('bitcoin');
........$bitcoin = new bitcoind($config['rpc_host'], $config['rpc_port']);
........$this->app->singleton(BitcoinRPC::class, function ($app) use ($bitcoin)
............return new BitcoinRPC($bitcoin);
....public function provides() {
........return [BitcoinRPC::class];
submitted by defineNothing to laravel [link] [comments]

RiB Newsletter #14 – Are We Smart (Contract) Yet?

We’re seeing a bunch of interesting Rust blockchain and crypto projects, so this month the “Interesting Things” section is loaded up with news, papers, and project links.
This month, Elrond, appeared on our radar with the launch of their mainnet. Although not written in Rust, it runs Rust smart contracts on its Arwen WASM VM, which itself is based on the Rust Wasmer VM. Along with NEAR, Nervos, and Enigma (and probably others), this continues an encouraging trend of blockchains enabling smart contracts in Rust. See the “Interesting Things” section for examples of Elrond’s Rust contracts.
Rust continues to be popular for research into zero-knowledge proofs, with Microsoft releasing Spartan, a zk-SNARK system without trusted setup.
In RiB news, we published a late one-year anniversary blog post. It has some reflection on the changes to, and growth of, RiB over the last year.
The Awesome Blockchain Rust project, which is maintained by Sun under the rust-in-blockchain GitHub org, has received a stream of updates recently, and is now published as the Awesome-RiB page on
It’s a pretty good resource for finding blockchain-related Rust projects, with links to many of the more prominent and mature projects noted in the RiB newsletter. It could use more eyes on it though.

Project Spotlight

Each month we like to shine a light on a notable Rust blockchain project. This month that project is… is an Ethereum & Celo library and wallet implementation, implemented as a port of the ethers.js library to Rust.
Ethereum client programming is usually done in JavaScript with either web3.js or ethers.js, with ethers.js being the newer of the two. These clients communicate to an Ethereum node, typically via JSON-RPC (or, when in the browser, via an “injected” client provider that follows EIP-1193, like MetaMask). then provides a strongly-typed alternative for writing software that interacts with the Ethereum network.
As of now it is only suited for non-browser use cases, but if you prefer hacking in Rust to JavaScript, as some of us surely do, it is worth looking into for your next Ethereum project.
The author of, Georgios Konstantopoulos, accepts donations to sponsor their work.
Note that there is also a Rust alternative to web3.js, rust-web3.

Interesting Things


Blog Posts



Podcasts and Videos

Read more:
submitted by Aimeedeer to rust [link] [comments]

Upcoming Major Riecoin 0.20 Upgrade

Upcoming Major Riecoin 0.20 Upgrade
A new major Riecoin upgrade is planned, and includes a hard fork. Below is a summary of the changes so far and the hard fork improvements. More details can be found on BitcoinTalk. Feel free to ask Pttn there or on Discord if you have questions regarding the update.
The first step of this upgrade was to update the base code to Bitcoin’s 0.20, which is done. You can find the experimental code at the Github repository. Experimental binaries can also be downloaded here. Despite their prerelease status, they should work fine, though please backup your wallets if you plan to use 0.20, just in case.
Pool operators and other advanced Riecoin users should start looking into the changes and update their software accordingly, as well as closely follow the Riecoin Core development.
Here is a list of notable changes from
The next step will be the hard fork, in order to improve Riecoin in multiple ways. Here is the list of planned changes.
Once the development is advanced enough, a date will be chosen for the hard fork. Testnet will be hardforked first to ensure the well functioning of the implementation. Stay tuned!
submitted by PttnMe to RieCoin [link] [comments]

Can i set my phone to connect to my own node during the initial block download?

I try to connect my phone to my node, but i get an error. Do I need to wait until the initial block download finishes?
Update: I resolved the issue by adding the following to by bitcoin.conf rpcallowip=MY_PHONES_IP/24 rpcallowip=MY_NODES_IP/24 rpcport=8333
I was using 8332 in my Bitcoin.conf and also on my phone. I was port forwarding 8332 to my node. I don't know why this port not working. I used 'telnet MY_NODES_IP 8332' on another computer and the connection did not connect, however I tried 8333 for grins and laughs; which connected... In bitcoin.conf, once I changed my rpcport to 8333, my phone connected to my node on my local network. Are there any downsides to setting the rpcport to 8333?
Thanks so much for everyone's help!!! rpcbind=
submitted by mickhick95 to Bitcoin [link] [comments]

Technical details of the Earthcoin network 2019

Technical details of the Earthcoin network 2019
Blockchain parameters
crypt hashing algorithm
Proof of Work (POW) mining
60 seconds block target
Difficulty retarget after each block (+167%, -91%)
Total coins will be 13.5 billion coins (infinite by a theory, because the minimal block reward is 1 EAC, but in the practice 13.5*109 will not be exceeded within the next 2000 years)
50 confirmations per minted block
5 confirmations per transaction
Supports transaction messages
Initial block reward on average 10,000 EAC, varies seasonly ( currently 625 EAC) Block payout is halved every year, minimum payout of 1 EAC per block Superblocks every 14 and 31 day The default ports are 35677 (P2P-network) and 15678 (RPC-calls, optional)
Transaction speed
The mechanism behind Earthcoin which is based on peer-to-peer, allows transactions to happen very quickly. This means that once you pay or get payed with Earthcoin, the time taken to see the money transferred is equal or sometimes faster than the avarege debit card. Earthcoin promotes transaction times of approximatly 30 seconds where it is actually closer to 10-15 seconds which is nowadays regarded as being instant. The true strength behind this speed is the abillity to use it in any store in the near future with the same feel of speed as the currency you hold today.
The Earthcoin network had been attacked by a 51% attack and controlled by a group of hackers for several months in the middle of 2017. Thanks to the unwavering efforts of the community, the attack was thrown back and EarthCoin was returned to all users. The source code was then fixed, secured against similar attacks in the future and a unique protection against time travel attack was implemented. The EarthCoin code is now much more secure than most of other cryptocurrencies. In the first half of 2019, a major upgrade of the Earthcoin network was done and security features according to the current blockchain protocol of Bitcoin and Litecoin networks were implemented.
submitted by zongyongge to Earthcoin [link] [comments]

Reddcoin (RDD) 02/20 Progress Report - Core Wallet v3.1 Evolution & PoSV v2 - Commits & More Commits to v3.1! (Bitcoin Core 0.10, MacOS Catalina, QT Enhanced Speed and Security and more!)

Reddcoin (RDD) Core Dev Team Informal Progress Report, Feb 2020 - As any blockchain or software expert will confirm, the hardest part of making successful progress in blockchain and crypto is invisible to most users. As developers, the Reddcoin Core team relies on internal experts like John Nash, contributors offering their own code improvements to our repos (which we would love to see more of!) and especially upstream commits from experts working on open source projects like Bitcoin itself. We'd like tothank each and everyone who's hard work has contributed to this progress.
As part of Reddcoin's evolution, and in order to include required security fixes, speed improvements that are long overdue, the team has up to this point incorporated the following code commits since our last v3.0.1 public release. In attempting to solve the relatively minor font display issue with MacOS Catalina, we uncovered a complicated interweaving of updates between Reddcoin Core, QT software, MacOS SDK, Bitcoin Core and related libraries and dependencies that mandated we take a holistic approach to both solve the Catalina display problem, but in doing so, prepare a more streamlined overall build and test system, allowing the team to roll out more frequent and more secure updates in the future. And also to include some badly needed fixes in the current version of Core, which we have tentatively labeled Reddcoin Core Wallet v3.1.
Note: As indicated below, v3.1 is NOT YET AVAILABLE FOR DOWNLOAD BY PUBLIC. We wil advise when it is.
The new v3.1 version should be ready for internal QA and build testing by the end of this week, with luck, and will be turned over to the public shortly thereafter once testing has proven no unexpected issues have been introduced. We know the delay has been a bit extended for our ReddHead MacOS Catalina stakers, and we hope to have them all aboard soon. We have moved with all possible speed while attempting to incorproate all the required work, testing, and ensuring security and safety for our ReddHeads.
Which leads us to: PoSV v2 activation and the supermajority on Mainnet at the time of this writing has reached 5625/9000 blocks or 62.5%. We have progressed quite well and without any reported user issues since release, but we need all of the community to participate! This activation, much like the funding mechanisms currently being debated by BCH and others, and employed by DASH, will mean not only a catalyst for Reddcoin but ensure it's future by providing funding for the dev team. As a personal plea from the team, please help us support the PoSV v2 activation by staking your RDD, no matter how large or small your amount of stake.
Every block and every RDD counts, and if you don't know how, we'll teach you! Live chat is fun as well as providing tech support you can trust from devs and community ReddHead members. Join us today in staking and online and collect some RDD "rain" from users and devs alike!
If you're holding Reddcoin and not staking, or you haven't upgraded your v2.x wallet to v3.0.1 (current release), we need you to help achieve consensus and activate PoSV v2! For details, see the pinned message here or our website or medium channel. Upgrade is simple and takes moments; if you're nervous or unsure, we're here to help live in Telegram or Discord, as well as other chat programs. See our website for links.
Look for more updates shortly as our long-anticipated Reddcoin Payment Gateway and Merchant Services API come online with point-of-sale support, as we announce the cross-crypto-project Aussie firefighter fundraiser program, as well as a comprehensive update to our development roadmap and more.
Work has restarted on ReddID and multiple initiatives are underway to begin educating and sharing information about ReddID, what it is, and how to use it, as we approach a releasable ReddID product. We enthusiastically encourage anyone interested in working to bring these efforts to life, whether writers, UX/UI experts, big data analysts, graphic artists, coders, front-end, back-end, AI, DevOps, the Reddcoin Core dev team is growing, and there's more opportunity and work than ever!
Bring your talents to a community and dev team that truly appreciates it, and share the Reddcoin Love!
And now, lots of commits. As v3.1 is not yet quite ready for public release, these commits have not been pushed publicly, but in the interests of sharing progress transparently, and including our ReddHead community in the process, see below for mind-numbing technical detail of work accomplished.
e5c143404 - - 2014-08-07 - Ross Nicoll - Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope. *99a7dba2e - - 2014-08-15 - Cory Fields - tests: fix test-runner for osx. Closes ##4708 *8c667f1be - - 2014-08-15 - Cory Fields - build: add to the list of meta-depends *bcc1b2b2f - - 2014-08-15 - Cory Fields - depends: fix shasum on osx < 10.9 *54dac77d1 - - 2014-08-18 - Cory Fields - build: add option for reducing exports (v2) *6fb9611c0 - - 2014-08-16 - randy-waterhouse - build : fix CPPFLAGS for libbitcoin_cli *9958cc923 - - 2014-08-16 - randy-waterhouse - build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix. *342aa98ea - - 2014-08-07 - Cory Fields - build: fix automake warnings about the use of INCLUDES *46db8ad51 - - 2020-02-18 - John Nash - build: add build.h to the correct target *a24de1e4c - - 2014-11-26 - Pavel Janík - Use complete path to include bitcoin-config.h. *fd8f506e5 - - 2014-08-04 - Wladimir J. van der Laan - qt: Demote ReportInvalidCertificate message to qDebug *f12aaf3b1 - - 2020-02-17 - John Nash - build: QT5 compiled with fPIC require fPIC to be enabled, fPIE is not enough *7a991b37e - - 2014-08-12 - Wladimir J. van der Laan - build: check for sys/prctl.h in the proper way *2cfa63a48 - - 2014-08-11 - Wladimir J. van der Laan - build: Add mention of --disable-wallet to bdb48 error messages *9aa580f04 - - 2014-07-23 - Cory Fields - depends: add shared dependency builder *8853d4645 - - 2014-08-08 - Philip Kaufmann - [Qt] move SubstituteFonts() above ToolTipToRichTextFilter *0c98e21db - - 2014-08-02 - Ross Nicoll - URLs containing a / after the address no longer cause parsing errors. *7baa77731 - - 2014-08-07 - ntrgn - Fixes ignored qt 4.8 codecs path on windows when configuring with --with-qt-libdir *2a3df4617 - - 2014-08-06 - Cory Fields - qt: fix unicode character display on osx when building with 10.7 sdk *71a36303d - - 2014-08-04 - Cory Fields - build: fix race in 'make deploy' for windows *077295498 - - 2014-08-04 - Cory Fields - build: Fix 'make deploy' when binaries haven't been built yet *ffdcc4d7d - - 2014-08-04 - Cory Fields - build: hook up qt translations for static osx packaging *25a7e9c90 - - 2014-08-04 - Cory Fields - build: add --with-qt-translationdir to configure for use with static qt *11cfcef37 - - 2014-08-04 - Cory Fields - build: teach macdeploy the -translations-dir argument, for use with static qt *4c4ae35b1 - - 2014-07-23 - Cory Fields - build: Find the proper xcb/pcre dependencies *942e77dd2 - - 2014-08-06 - Cory Fields - build: silence mingw fpic warning spew *e73e2b834 - - 2014-06-27 - Huang Le - Use async name resolving to improve net thread responsiveness *c88e76e8e - - 2014-07-23 - Cory Fields - build: don't let libtool insert rpath into binaries *18e14e11c - - 2014-08-05 - ntrgn - build: Fix windows configure when using --with-qt-libdir *bb92d65c4 - - 2014-07-31 - Cory Fields - test: don't let the port number exceed the legal range *62b95290a - - 2014-06-18 - Cory Fields - test: redirect comparison tool output to stdout *cefe447e9 - - 2014-07-22 - Cory Fields - gitian: remove unneeded option after last commit *9347402ca - - 2014-07-21 - Cory Fields - build: fix broken boost chrono check on some platforms *c9ed039cf - - 2014-06-03 - Cory Fields - build: fix whitespace in pkg-config variable *3bcc5ad37 - - 2014-06-03 - Cory Fields - build: allow linux and osx to build against static qt5 *01a44ba90 - - 2014-07-17 - Cory Fields - build: silence false errors during make clean *d1fbf7ba2 - - 2014-07-08 - Cory Fields - build: fix win32 static linking after libtool merge *005ae2fa4 - - 2014-07-08 - Cory Fields - build: re-add AM_LDFLAGS where it's overridden *37043076d - - 2014-07-02 - Wladimir J. van der Laan - Fix the Qt5 build after d95ba75 *f3b4bbf40 - - 2014-07-01 - Wladimir J. van der Laan - qt: Change serious messages from qDebug to qWarning *f4706f753 - - 2014-07-01 - Wladimir J. van der Laan - qt: Log messages with type>QtDebugMsg as non-debug *98e85fa1f - - 2014-06-06 - Pieter Wuille - libsecp256k1 integration *5f1f2e226 - - 2020-02-17 - John Nash - Merge branch 'switch_verification_code' into Build *1f30416c9 - - 2014-02-07 - Pieter Wuille - Also switch the (unused) verification code to low-s instead of even-s. *1c093d55e - - 2014-06-06 - Cory Fields - secp256k1: Add build-side changes for libsecp256k1 *7f3114484 - - 2014-06-06 - Cory Fields - secp256k1: add libtool as a dependency *2531f9299 - - 2020-02-17 - John Nash - Move network-time related functions to timedata.cpp/h *d003e4c57 - - 2020-02-16 - John Nash - build: fix build weirdness after 54372482. *7035f5034 - - 2020-02-16 - John Nash - Add ::OUTPUT_SIZE *2a864c4d8 - - 2014-06-09 - Cory Fields - crypto: create a separate lib for crypto functions *03a4e4c70 - - 2014-06-09 - Cory Fields - crypto: explicitly check for byte read/write functions *a78462a2a - - 2014-06-09 - Cory Fields - build: move bitcoin-config.h to its own directory *a885721c4 - - 2014-05-31 - Pieter Wuille - Extend and move all crypto tests to crypto_tests.cpp *5f308f528 - - 2014-05-03 - Pieter Wuille - Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible *0161cc426 - - 2014-05-01 - Pieter Wuille - Add built-in RIPEMD-160 implementation *deefc27c0 - - 2014-04-28 - Pieter Wuille - Move crypto implementations to src/crypto/ *d6a12182b - - 2014-04-28 - Pieter Wuille - Add built-in SHA-1 implementation. *c3c4f9f2e - - 2014-04-27 - Pieter Wuille - Switch miner.cpp to use sha2 instead of OpenSSL. *b6ed6def9 - - 2014-04-28 - Pieter Wuille - Remove getwork() RPC call *0a09c1c60 - - 2014-04-26 - Pieter Wuille - Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. *8ed091692 - - 2014-04-20 - Pieter Wuille - Add a built-in SHA256/SHA512 implementation. *0c4c99b3f - - 2014-06-21 - Philip Kaufmann - small cleanup in src/compat .h and .cpp *ab1369745 - - 2014-06-13 - Cory Fields - sanity: hook up sanity checks *f598c67e0 - - 2014-06-13 - Cory Fields - sanity: add libc/stdlib sanity checks *b241b3e13 - - 2014-06-13 - Cory Fields - sanity: autoconf check for sys/select.h *cad980a4f - - 2019-07-03 - John Nash - build: Add a top-level forwarding target for src/ objects *f4533ee1c - - 2019-07-03 - John Nash - build: qt: split locale resources. Fixes non-deterministic distcheck *4a0e46e76 - - 2019-06-29 - John Nash - build: fix version dependency *2f61699d9 - - 2019-06-29 - John Nash - build: quit abusing AMCPPFLAGS *99b60ba49 - - 2019-06-29 - John Nash - build: avoid the use of top and abs_ dir paths *c8f673d5d - - 2019-06-29 - John Nash - build: Tidy up file generation output *5318bce57 - - 2019-06-29 - John Nash - build: nuke Makefile.include from orbit *672a25349 - - 2019-06-29 - John Nash - build: add stub makefiles for easier subdir builds *562b7c5a6 - - 2020-02-08 - John Nash - build: delete old's *066120079 - - 2020-02-08 - John Nash - build: Switch to non-recursive make
Whew! No wonder it's taken the dev team a while! :)
TL;DR: Trying to fix MacOS Catalina font display led to requiring all kinds of work to migrate and evolve the Reddcoin Core software with Apple, Bitcoin and QT components. Lots of work done, v3.1 public release soon. Also other exciting things and ReddID back under active dev effort.
submitted by TechAdept to reddCoin [link] [comments]

Monthly Nano News: December 2019 + Year Recap Special

This is what NANO has been up to lately. I don't think I lie if I say it has been quite an amazing year!
See you soon and happy new year! Something nice is coming soon that I have been working on for a while, stay tuned..

December 2019

November 2019

October 2019

September 2019

August 2019

July 2019

June 2019

May 2019

Apr 2019

Mar 2019

Feb 2019

Jan 2019

More news here:
submitted by Joohansson to nanocurrency [link] [comments]

PiNode-XMR (Single board computer Plug and Play Full Monero Node) Free image download and updated to v2.12.19. **Lots of new features**

PiNode-XMR (Single board computer Plug and Play Full Monero Node) Free image download and updated to v2.12.19. **Lots of new features**

Main project page with manual and screenshots
Download PiNode-XMR_v2.12.19_m0.15.0.1.img -Hosted on Google drive - 6.45GB
SHA256 Hash: 0EE90EEC65F430DC89FB3236474AA576BA0AFFFF4005B044FFE40D4A47B148F0
Hardware: Raspberry Pi 3/4 including B and + models
New Features:
  • Onion Monero Blockchain Explorer by mWo12 included.
  • Auto loading menu for Monero updates, and script that auto detects, formats and mounts attached USB drives. Labels drive for simple detection by future versions of PiNode-XMR so the blockchain is maintained between versions.
  • Public node - RPC_payments ready. Receive payment* for running a node (more info here) Pending monero/pull/6260 ( context of issue monero/issues/3083 )
All features:
  • 4 Node modes (click to start)
    • Private Node
    • tor bridging Node - routes your transactions through the tor network
    • Public Node - Using new RPC payment feature* - soon
    • Private Node - with mining (For education/experiment only)
  • Simple control with Web-UI
    • View Monero node and hardware status
    • Control bandwidth, connection limits and RPC port
    • Transaction pool and summary viewer
    • View connected peer info
    • Monerod log file view page
  • Easy setup menu for config of passwords, USB storage, Update and optional dynamic DNS.
  • All the benefits of running on a Pi, silent/fanless, low power (approx 15w) for 24/7 node, low cost.
  • Headless (No need for extra monitor,keyboard,etc) and connect via Ethernet or WiFi**
I've been making nodes for other coins for a few years to learn about some crypto basics. It got a bit of interest for I have a site but recently far more advanced projects have come on the scene (such as RaspiBlitz for Bitcoin) which was so far superior there was no sense pursuing it . However there are benefits for Monero users running their own node and we didn't have that quality of plug and play node. So I've been giving it a go and this is the result.
The Future of PiNode-XMR:
First of all project needs feedback to continue, I don't know what to develop and introduce unless people say what they don't like, do like or want.
Second, it'd be great if anyone else in the Monero community would like to get involved, we have a great group and I'm sure there is an aspect of this project someone takes an interest in. Please get in touch. Like if there are any budding website designers in our midst the UI is the last module of this project that isn't open source, it's from a template and I've put it together best I can but...throwing that out there :) I'd be nice if the monero community could completely own this project, completely open source.
Finally, I know that now there is more choice on the single board computer market and although the Raspberry Pi is popular it may not be the best hardware choice. So the next plan is to rather than make disk images that are hardware specific, to instead make scripts that are based on an OS ( probably Debian ). This way this project can be built by anyone using a single command onto Pine64, Odroid, Bananapi or any old laptop/pc with Debian for thier full node.
Thanks for taking an interest and readingDan
The "Advanced Settings" page from the UI for a bit of colour after all that text:
Edit: Added download link to this page too. Corrected image layout.
Edit2: Added hash of image. And note it's also possible to flash the image directly onto a USB drive with a program like Rufus and not insert a MicroSD at all. You'll need to then manually expand that partition to the size of the drive, but may be useful to know.
submitted by shermand100 to Monero [link] [comments]

Creamcoin – following Bitcoin’s tale

Creamcoin – following Bitcoin’s tale

06/08/2019 3 min read📷216SHARES216VIEWSShare on Twitter
When new Creamcoin was designed, we had in mind not only a coin that would hold parity with any cryptocurrency, but something that would demonstrate the extra-special capabilities of a decentralized ledger, capable to introduce, help and bring it further to the regular people. Blockchain developing is unstoppable complex process with endless possibilities. Integration of applications on such a technology could achieve better, secure pass of value.

On August 5th, 2019 Creamcoin code was successfully updated to the latest Bitcoin version 0.18.0
With this latest release, we proved that Creamcoin itself it’s not a sort of a tenant to the Bitcoin. Much easier to apply and to pursue the main purpose of existence and to create further innovations in our Cream Line. The new release brings tremendous performance improvements, as well as integration will be much easier for any platform, exchange or integrator. Wallets are available to Releases tab on github

Multi-wallet support

Cream Core now supports loading multiple, separate wallets. The wallets are completely separated, with individual balances, keys and received transactions. Multi-wallet is enabled by using more than one -wallet argument when starting Creamcoin, either on the command line or in the Cream config file. In Creamcoin-Qt, only the first wallet will be displayed and accessible for creating and signing transactions. GUI selectable multiple wallets will be supported in a future version. This feature will continue to be refined with later updates, as there are still some known issues in using the GUI to access the “multiwallet” command. The most notable is that you can’t use coin control features with multiple wallets loaded, or else you will likely retain the wrong wallet when attempting to switch wallets.
When running Cream Core with multi-wallet, wallet-level RPC methods must specify the wallet for which they’re intended in every request. HTTP RPC requests should be send to the :/wallet// endpoint, for example bitcoin-cli commands should be run with a -rpcwallet option, for example [bitcoin-cli -rpcwallet=wallet1.dat getbalance] A new node-level [listwallets] RPC method is added to display which wallets are currently loaded. Starting command for both wallets should look like this: [creamd -daemon -wallet=wallet1.dat -wallet=wallet2.dat]

Hardware Wallet native compatibility

With a new release of Cream Core the possibility is added in the form of use hardware wallets (Ledger, Trezor, Digital BitBox, KeepKey, Coldcard), but this process is manual and involves the use of Hardware Wallet Interaction (HWI) tool and it needs HW support and addition of Cream in the future, which is not excluded from roadmap. This is a great news for everyone who use Cream Core, and want extra security. Only applies to those who can use command line/CLI (for now), and when some of Hardware wallets actually supports Cream.

SegWit 4MB limit

SegWit replacing the block size limit with a block “weight” limit, allowing up to 4 megabytes of transaction data, and giving a substantial boost in the transaction capacity of the Cream network.

In the same with the new code update, Creamcoin Team is doing major shifting power, migrating the marketing and promotion activities, from our news site to our main page We will come up with additional statement in this matter, so our supporters and followers have better perspective of Cream Line and the products of it.
In the meantime we are looking into new ways that developers can enhance the capabilities of the Creamcoin protocol, integration of decentralized exchange functionality, lightning network and number of other options that would allow for different types of conditional sends of Creamcoin assets. We are inviting any individual, platform, exchange or integrator who would like to submit recommendations or feature requests, feel free to contribute to the Creamcoin Github.
By Cream Team
submitted by creamcointeam to u/creamcointeam [link] [comments]

Problem while running my node

So I already have the node set up on my raspberry pi. This night the transfer of the Blockchain from my laptop to the raspi's hard disk finished. Now I am waiting for the blocks to match the headers
"blocks": 162064, "headers": 613982
The thing is that when I do bitcoin-cli getblockchaininfo to check if it is already complete, I get this error:
error: Could not connect to the server
Make sure the bitcoind server is running and that you are connecting to the correct RPC port.

I check if bitcoind is running with systemctl status bitcoind.service and this shows up:
● bitcoind.service - Bitcoin daemon
Loaded: loaded (/etc/systemd/system/bitcoind.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Wed 2020-01-22 11:59:12 CET; 15s ago
Process: 811 ExecStartPre=/bin/sh -c sleep 30 (code=exited, status=0/SUCCESS)
Process: 814 ExecStart=/uslocal/bin/bitcoind -daemon -conf=/home/bitcoin/.bitcoin/bitcoin.conf -pid=/home/bitcoin/.bitcoin/ (code=exited, status=0/SUCCESS)
Main PID: 815 (code=exited, status=1/FAILURE)

So I try to restart the bitcoin daemon with sudo systemctl stop bitcoind and sudo systemctl start bitcoind. And when I check its status it shows the following (which looks good):
bitcoind.service - Bitcoin daemon
Loaded: loaded (/etc/systemd/system/bitcoind.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-01-22 12:01:01 CET; 5s ago
Process: 862 ExecStartPre=/bin/sh -c sleep 30 (code=exited, status=0/SUCCESS)
Process: 864 ExecStart=/uslocal/bin/bitcoind -daemon -conf=/home/bitcoin/.bitcoin/bitcoin.conf -pid=/home/bitcoin/.bitcoin/ (code=exited, status=0/SUCCESS)
Main PID: 865 (bitcoind)
Tasks: 12 (limit: 2200)
Memory: 111.0M
CGroup: /system.slice/bitcoind.service
└─865 /uslocal/bin/bitcoind -daemon -conf=/home/bitcoin/.bitcoin/bitcoin.conf -pid=/home/bitcoin/.bitcoin/
And when I do bitcoin-cli getblockchaininfo again, it doesn't show me an error, but the number of blocks synchronized is lower then before. And a few minutes later, when I go check again it all repeats itself.
What am I supposed to do here?
Update: I started crying now.
submitted by nerviosus to Bitcoin [link] [comments]

[DEVELOPMENT] Bitcoind IPV4 testnet port (18332) is failing to bind

[SOLVED] Thanks for everyone that have helped!

Hello everyone, this is a development problem that I'm currently having. Since the BTC Development sub is kind of inactive and I couldn't find any rule contraty to posting about BTC Development, I'll try my luck in here as I'm hopeless already. I've posted on BTC Stack Exchange but no answers also. Please, don't get me wrong, I'm trying to solve this problem for many days now, I've looked up everywhere for this.
I'm new to Bitcoin development and I'm currently having difficulties trying to make RPC calls from a Docker Container to a Bitcoin-Core daemon running in a SSH server. I suppose that the problem may be with Firewall or closed ports, but I also do not know much about Network settings.
I'm using nbobtc/bitcoind-php package to make the RPC calls with HTTP requests, and it is running in a Docker container. I'm sure the container is functional and is not the problem.
So here's what happening: when I run bitcoind in root user (but normal also won't work) in my SSH server, the IPV4 testnet port seems to be not opened. This message goes up when I run bitcoind:
Binding RPC on address port 18332 failed.
Here's what my bitcoin.conf looks like (I want to use testnet in here). I'm using Bitcoin-Core "subversion": "Satoshi:0.17.1".
server=1 debug=net txindex=1 testnet=1 rpcuser=userb rpcpassword=test test.rpcport=18332 # I've already tried allowing the IP these 3 ways: # rpcallowip=192.168.xx.xx # My machine's IP # rpcallowip=172.19.x.x/xx # Docker's NBOBTC container IP # rpcallowip= # Allowing all IP datadir=/home/bitcoin-dev/.bitcoin debuglogfile=/home/bitcoin-dev/.bitcoin/debug.log 
Here's what appears in debug.log right after I run Bitcoind:
2019-05-06T14:43:10Z Bitcoin Core version v0.17.1 (release build) 2019-05-06T14:43:10Z InitParameterInteraction: parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1 2019-05-06T14:43:10Z Assuming ancestors of block 0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75 have valid signatures. 2019-05-06T14:43:10Z Setting nMinimumChainWork=00000000000000000000000000000000000000000000007dbe94253893cbd463 2019-05-06T14:43:10Z Using the 'sse4(1way),sse41(4way)' SHA256 implementation 2019-05-06T14:43:10Z Default data directory /root/.bitcoin 2019-05-06T14:43:10Z Using data directory /home/bitcoin-dev/.bitcoin/testnet3 2019-05-06T14:43:10Z Using config file /home/bitcoin-dev/.bitcoin/bitcoin.conf 2019-05-06T14:43:10Z Using at most 125 automatic connections (1024 file descriptors available) 2019-05-06T14:43:10Z Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements 2019-05-06T14:43:10Z Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements 2019-05-06T14:43:10Z Using 4 threads for script verification 2019-05-06T14:43:10Z scheduler thread start 2019-05-06T14:43:10Z Binding RPC on address port 18332 failed. 2019-05-06T14:43:10Z HTTP: creating work queue of depth 16 2019-05-06T14:43:10Z Config options rpcuser and rpcpassword will soon be deprecated. Locally-run instances may remove rpcuser to use cookie-based auth, or may be replaced with rpcauth. Please see share/rpcauth for rpcauth auth generation. 2019-05-06T14:43:10Z HTTP: starting 4 worker threads 2019-05-06T14:43:10Z Using wallet directory /home/bitcoin-dev/.bitcoin/testnet3/wallets 2019-05-06T14:43:10Z init message: Verifying wallet(s)... 2019-05-06T14:43:10Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010) 2019-05-06T14:43:10Z Using wallet wallet.dat 2019-05-06T14:43:10Z BerkeleyEnvironment::Open: LogDir=/home/bitcoin-dev/.bitcoin/testnet3/wallets/database ErrorFile=/home/bitcoin-dev/.bitcoin/testnet3/wallets/db.log 2019-05-06T14:43:10Z net: setting try another outbound peer=false 2019-05-06T14:43:10Z Cache configuration: 2019-05-06T14:43:10Z * Using 2.0MiB for block index database 2019-05-06T14:43:10Z * Using 56.0MiB for transaction index database 2019-05-06T14:43:10Z * Using 8.0MiB for chain state database 2019-05-06T14:43:10Z * Using 384.0MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space) 2019-05-06T14:43:10Z init message: Loading block index... 2019-05-06T14:43:10Z Opening LevelDB in /home/bitcoin-dev/.bitcoin/testnet3/blocks/index 2019-05-06T14:43:10Z Opened LevelDB successfully 2019-05-06T14:43:10Z Using obfuscation key for /home/bitcoin-dev/.bitcoin/testnet3/blocks/index: 0000000000000000 2019-05-06T14:43:19Z LoadBlockIndexDB: last block file = 161 2019-05-06T14:43:19Z LoadBlockIndexDB: last block file info: CBlockFileInfo(blocks=755, size=30875345, heights=1513309...1514061, time=2019-04-29...2019-05-03) 2019-05-06T14:43:19Z Checking all blk files are present... 2019-05-06T14:43:20Z Opening LevelDB in /home/bitcoin-dev/.bitcoin/testnet3/chainstate 2019-05-06T14:43:20Z Opened LevelDB successfully 2019-05-06T14:43:20Z Using obfuscation key for /home/bitcoin-dev/.bitcoin/testnet3/chainstate: 2686d59caeb1917c 2019-05-06T14:43:20Z Loaded best chain: hashBestChain=00000000b3b6a5db140b6058b7abe5cb00d8af61afd2a237ae3468cd36e387fa height=927391 date=2016-09-08T15:04:00Z progress=0.311180 2019-05-06T14:43:20Z init message: Rewinding blocks... 2019-05-06T14:43:29Z init message: Verifying blocks... 2019-05-06T14:43:29Z Verifying last 6 blocks at level 3 2019-05-06T14:43:29Z [0%]...[16%]...[33%]...[50%]...[66%]...[83%]...[99%]...[DONE]. 2019-05-06T14:43:29Z No coin database inconsistencies in last 6 blocks (500 transactions) 2019-05-06T14:43:29Z block index 19450ms 2019-05-06T14:43:29Z Opening LevelDB in /home/bitcoin-dev/.bitcoin/testnet3/indexes/txindex 2019-05-06T14:43:30Z Opened LevelDB successfully 2019-05-06T14:43:30Z Using obfuscation key for /home/bitcoin-dev/.bitcoin/testnet3/indexes/txindex: 0000000000000000 2019-05-06T14:43:30Z init message: Loading wallet... 2019-05-06T14:43:30Z txindex thread start 2019-05-06T14:43:30Z [default wallet] nFileVersion = 170100 2019-05-06T14:43:30Z [default wallet] Keys: 2005 plaintext, 0 encrypted, 2005 w/ metadata, 2005 total. Unknown wallet records: 1 2019-05-06T14:43:30Z Syncing txindex with block chain from height 694205 2019-05-06T14:43:30Z [default wallet] Wallet completed loading in 123ms 2019-05-06T14:43:30Z [default wallet] setKeyPool.size() = 2000 2019-05-06T14:43:30Z [default wallet] mapWallet.size() = 7 2019-05-06T14:43:30Z [default wallet] mapAddressBook.size() = 4 2019-05-06T14:43:30Z mapBlockIndex.size() = 1515581 2019-05-06T14:43:30Z nBestHeight = 927391 2019-05-06T14:43:30Z torcontrol thread start 2019-05-06T14:43:30Z Bound to [::]:18333 2019-05-06T14:43:30Z Bound to 2019-05-06T14:43:30Z init message: Loading P2P addresses... 2019-05-06T14:43:30Z Loaded 10420 addresses from peers.dat 36ms 2019-05-06T14:43:30Z init message: Loading banlist... 2019-05-06T14:43:30Z Loaded 0 banned node ips/subnets from banlist.dat 29ms 2019-05-06T14:43:30Z init message: Starting network threads... 2019-05-06T14:43:30Z net thread start 2019-05-06T14:43:30Z dnsseed thread start 2019-05-06T14:43:30Z addcon thread start 2019-05-06T14:43:30Z msghand thread start 2019-05-06T14:43:30Z init message: Done loading 2019-05-06T14:43:30Z opencon thread start 
After all that appears above, there are just "UpdateTip", "Requesting block", "received block" and "getdata" messages. (so the P2P port, 18333, works).

And here is when I netstat:

sudo netstat -nap|grep bitcoin|grep LISTEN
tcp 0 0* LISTEN 31185/bitcoind tcp6 0 0 :::18332 :::* LISTEN 31185/bitcoind tcp6 0 0 :::18333 :::* LISTEN 31185/bitcoind 
Thank you in advance!

PS: A few days ago I could make it work when running bitcoind with root user, but now even that won't solve the problem.
submitted by VicPietro to Bitcoin [link] [comments]

Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf - YouTube What is Bitcoin - Meet Bitcoins Top 5 millionaires - YouTube Bitcoin JSON-RPC Tutorial 4 - Command Line Interface - YouTube Bitcoin JSON-RPC Tutorial 2 - VPS Setup setting up bitcoin with GUI miner [updated]

## bitcoin.conf configuration file. Lines beginning with # are comments. # Run on the test network instead of the real bitcoin network. # Bind to given address and always listen on it. Use [host]:port notation for IPv6 # Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 ## Q The client can be configured to accept JSON-RPC communications, and when that is enabled will, by default, be on port 8332. Earlier versions of Bitcoin Core permitted this to be secured with SSL communications using the same port or a different port, however that capability has since been removed. Bitcoin Stack Exchange is a question and answer site for Bitcoin crypto-currency enthusiasts. It only takes a minute to sign up. Sign up to join this community The interaction between them happens via JSON-RPC over TCP port 8332. In order for them to recognize and trust each other, you need to set rpcpassword, which is written in the file ~/.bitcoin / bitcoin.conf as rpcpassword=blah-blah-blah. If you do not have such a file you need to create it. There you can register and other settings from those given when starting the daemon. Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) -rpcallowip=<ip> Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g., a network/netmask (e.g. or a network/CIDR (e.g. This option can be specified multiple times -rpcthreads=<n> Set the number of threads to service RPC calls (default: 4) UI ...

[index] [14668] [8089] [26898] [49971] [34001] [32140] [18277] [14172] [38480] [1531]

Bitcoin JSON-RPC Tutorial 3 - bitcoin.conf - YouTube

Bitcoin JSON-RPC tutorial. Set up your bitcoin.conf file and create custom settings with bitcoind. BTC: 1NPrfWgJfkANmd1jt88A141PjhiarT8d9U Bitcoin JSON-RPC tutorial. Getting started with the bitcoin command line interface. My Book: In this video we look at the iOS Kodi Remote app and the underlying JsonRpc API that drives it. Default RPC port is 9337 - This is the port is point your miners towards if solo mining 2.5 minutes block target 504 blocks to retarget difficulty 41.4% maximum change on difficulty retarget Block ... This video is unavailable. Watch Queue Queue. Watch Queue Queue Queue